Friday, 19 May 2017

Stimsonite ENNIS Aluminium Road Stud By Flexijoint

Stimsonite ENNIS Aluminium Road Stud
Road studs are commonly known as highway studs or railways studs or highway markers.Road studs are a type of traffic safety product fixed in the middle of lane lines or yellow double-line for, through its retro reflection, reminding drivers to drive their vehicles along with the lanes.

Features :-
~ 112L x 91W x 20H (mm);
~ Shank 55mm;
~ Load capacity up to 25 tons;
~ Highest reflectivity lens area 168 square millimeters;
~ High durability;
~ High impact resistance;
~ Grove bottom for better grip and easy installation;

Epoxy resin installation method is normally adopted generally for installation of road studs. Two component road stud epoxy adhesive is usually used. Part A and Part B should be mixed thoroughly. To avoid wastage do not mix more epoxy than what will be required in the next 25 minutes (i.e. start with 1 liter only). 8 to 10 studs can be installed per liter of epoxy.

Stimsonite ENNIS aluminium road stud with Double Amber reflector market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. For further enquiry, please contact us at T: +6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  E: flexijoint.ims@gmail.com.

Thursday, 18 May 2017

Traffic Channelizer Barrel Drum By Flexijoint

Traffic Channelizer Barrel Drum

Traffic Channelizer Barrel Drum is the highest quality safety drums ideal for traffic control needs. The Traffic Channelizer Barrel Drum is widely used to indicate directional changes for road lane closures,separator and crossroad at construction sites. They are ideal for both pedestrians and vehicles traffic control.

Traffic Channelizer Barrel Drum comes with molded grip handle and reflective sheeting.This ensures easy mobility of carrying them around. The Traffic Channelizer Barrel Drum is designed as such that the barrel drum is separable from its base allowing stacking for easy storage and easy transfer management.

The barrel drum base is made from 100% recycled PVC, and is incredibly durable in various weather conditions. The weighted base of 15 Kgs and the barrel drum that's water storage capability up to 200 litres ensures maximum stability and making it unmovable resistance from passing vehicles.

High quality Polyethylene engineered in the drum allows reshape after impact. A simple hand pressure to the areas of the drum that is dented may reshape it to its original condition and reusable again.

Hazard blinker lights and delineators can be used as accessories to these Traffic Channelizer Barrel Drum to enhance greater visibility.

SPECIFICATIONS:-
TRAFFIC CHANNELIZER BARREL DRUM
~ Size 1080H x 780 mm;
~ Weight appx 4Kgs;
~ HDPE material;
~ Reflective collar sheeting.

BARREL DRUM BASE
~ Size 780mm;
~ Weight 15Kgs;
~ Recycled PVC.
~ Withstand temperature -55C to +50C;
~ Tensile Strength up to 15.0MPA;
~ Elongation At Break 500%;
~ Hardness 90A;
~ Impact Elasticity 31%;
~ Abrasion Performance 0.21cm3 / 1.61KM

Traffic Channelizer Barrel Drum market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. For further enquiry, please contact us at T: +6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  E: flexijoint.ims@gmail.com.

Friday, 14 April 2017

Flexijoint Rubber Rumble Speed Hump For Motorcycle Driveway



Rubber Speed Hump replaces the conventional concrete speed hump. It is easily fixed and dismantled conveniently as and when one wished. Rubber Speed Hump is designed to reduce vehicle speed, built for long lasting and cost efficient.

Display shown is Rubber Rumble Speed Hump 150mm (W) x 30mm (H) x 1000mm (L) suitable for slowing down motorcycles ~ Front View.

Rubber Rumble Speed Hump Advantages:

Optimum Resilience, High Elasticity & Stretch Strength, Corrosion Immunity, Excellent Weather Resistant, High Mechanical & Tensile Strength, Long Life Span, Immune to Acids, Alkaline, Metals, Salts, Chemical, Non Hazardous, High Elongation At Break, Stable Colour.

Rubber Rumble Speed Hump market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia.  For further enquiry, please contact us at T: +6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  E: flexijoint.ims@gmail.com.

Wednesday, 12 April 2017

Local Manufactured Natural Rubber Speed Hump From Flexijoint



Natural Rubber Speed Hump replaces the conventional concrete speed hump. It is easily fixed and dismantled conveniently as and when one wished. Natural Rubber Speed Hump is designed to reduce vehicle speed, built for long lasting and cost efficient.

Display shown is Natural Rubber Speed Humps - Intermediate Piece 355mm (W) x 50mm (H) x 255mm (L) and End Cap Piece 355mm (W) x 50mm (H) x 175mm (L).

Natural Rubber Speed Hump Advantages:
Optimum Resilience, High Elasticity & Stretch Strength, Corrosion Immunity, Excellent Weather Resistant, High Mechanical & Tensile Strength, Long Life Span, Immune to Acids, Alkaline, Metals, Salts, Chemical, Non Hazardous, High Elongation At Break, Stable Colour.


Natural Rubber Speed Hump market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia.  For further enquiry, please contact us at T: +6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  E: flexijoint.ims@gmail.com.

Friday, 18 November 2016

Flexijoint Recycled and Virgin Molded Rubber Wall Bumper

Rubber Wall Bumper 

Flexijoint Rubber Wall Bumper Protector Guard maximises protection against heavy vehicles such as trailers, lorries direct impact forces.

Flexijoint Rubber Wall Bumper Protector Guard compression molded from resilient recycled and virgin rubber well formulated to withstand abrasion, weather resistance, provides replaceable for walls that are susceptible to damages.

Standard size available 250mm (W) x 330mm (L) x 102mm thick and 250mm (W) x 450mm (L) x 102mm thick.

Display shown is Flexijoint Rubber Wall Bumper Protector Guard 250mm (W) x 330mm (L) x 102mm thick and weigh 8 Kgs suitable for loading bay areas.
( Picture Taken : Front Vertical View )

Flexijoint Rubber Wall Bumper Protector Guard, market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. 
For further enquiry, please contact us at T: +6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  E: flexijoint.ims@gmail.com.

Wednesday, 9 November 2016

Nylon PU Post Traffic Lane Divider From Flexijoint


Front View
Side View














Road Lane Block or Traffic Lane Divider serves as a barrier (as a guardrail, fence, or open wall) placed between the lanes of a highway to divide the traffic moving in opposite directions. It is ideal for merges, gores, eliminating prohibited left turns, circles, work zones, and bicycle lane protection.

Road Lane Block or Traffic Lane Divider with reboundable post allows vehicles on emergency situation to cross over it. High quality side reflector on it is an additional safety feature improving night vision to drivers as where there is lane divider ahead.

It is not surprisingly that this type of Road Lane Block or Traffic Lane Divider gain popularity and replaces the conventional concrete Road Lane Block or Traffic Lane Divider. It is easily fixed and dismantled conveniently as and when one wished. High impact resistance Polyurethane (PU) post designed for long lasting,cost efficient and separately replaceable..

Picture Displayed : Nylon PU Post Road Lane Block / Traffic Lane Divider:-

~ Base Weight : .4.5Kgs;
~ Base Material : High Grade Nylon ;
~ Base Size : 1000L x 200W x 85H (mm);
~ Base Maximum Loading Capacity : 80 Tons; 
~ Post Height : 695mm;
~ Post Weight : 1 Kg;
~ Post Material : Polyurethane (PU);

Nylon PU Post Road Lane Block / Traffic Lane Divider market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. 
For further enquiry, please contact us at T: +6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  E: flexijoint.ims@gmail.com.

Thursday, 6 October 2016

Trafico TRC Aluminium Road Stud By Flexijoint

Trafico TRC Aluminium Road Stud
Road studs are commonly known as highway studs or railways studs or highway markers.Road studs are a type of traffic safety product fixed in the middle of lane lines or yellow double-line for, through its retro reflection, reminding drivers to drive their vehicles along with the lanes.

Features :-
~ Meets MS 1719: 2003 standard;
~ 103 x 90 x 25 (mm);
~ Economical and durable;
~ Easy to install;

Epoxy resin installation method is normally adopted generally for installation of road studs. Two component road stud epoxy adhesive is usually used. Part A and Part B should be mixed thoroughly. To avoid wastage do not mix more epoxy than what will be required in the next 25 minutes (i.e. start with 1 liter only). 8 to 10 studs can be installed per liter of epoxy.

Trafico TRC aluminium road stud with Double Amber reflector market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. For further enquiry, please contact us at T: +6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  E: flexijoint.ims@gmail.com.