Wednesday, 11 September 2019

High Quality Hazard Blinker Lamp From Flexijoint

Front View
Back View














Hazard Blinker Lamp are normally used in conjunction with warning signs such as dangerous curves, speed limit reductions, school zones, signal ahead, low clearance, flooding, icing, or fog. 


Hazard Blinker Lamp minimises risk of accident occurrence at construction sites or any hazardous area as flashers work effectively to warn incoming visitors to the compound. 

Features :-

~ LED design;
~ Fulfilled BS 3143 Standard Energy Savings;
~ Operate by 2 x 6V lantern battery;
~ Operating time up to 2,600 hours with new battery;
~ Built in light sensor switch or resistor detect darkness and activate lamp but in deactivate mode when light levels increase hence conserving battery energy;
~ All weather waterproof;
~ Durable quality plastic material from Korea;
~ Large lens for excellent visibility;
~ Flash / Steady lighting mode;
~ Mounted bracket included.

Display : Hazard Blinker Lamp Amber / Yellow Colour.

Hazard Blinker Lamp market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. For further enquiry, kindly contact us at T: +6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  E: flexijoint.ims@gmail.com.

Wednesday, 4 September 2019

Quality Aluminium K Lite KT-304 Road Stud From Flexijoint

Aluminium K Lite KT-304 Road Stud


Road studs are commonly known as highway studs or railways studs or highway markers.Road studs are a type of traffic safety product fixed in the middle of lane lines or yellow double-line for, through its retro reflection, reminding drivers to drive their vehicles along with the lanes.

Features :-
~ ASTM D4280, EN1463-1, SIRIM 1719:2003 standard;
~ PMMA lens ensure highest reflectivity;
Reflectivity ( White Colour ):-
Entrance Angle ( βH , βv=0° ) ±15°  ±10°    ±5° 

Observation Angle α                   2°      1°    0.3°
EN1463-1 (mcd/lx)                   2.5     25     220
Sample 1 (mcd/lx)                    3.8     39     345
Sample 2 (mcd/lx)                    5.1     50     442
Sample 3 (mcd/lx)                    4.6     47     416

(White mcd/lux), (Oberservation Angle=0.2 degree):-

Test Point                                 20L     0.2deg    20R
ASTM D4280                          112      279       112
Sample 1                                 178      628       196
Sample 2                                 275      702       249
Sample 3                                 245      612       203

~ Lowest cost;
~ High load capacity;
~ Good adhesive ability;
~ Easy to install;

Epoxy resin installation method is normally adopted generally for installation of road studs. Two component road stud epoxy adhesive is usually used. Part A and Part B should be mixed thoroughly. To avoid wastage do not mix more epoxy than what will be required in the next 25 minutes (i.e. start with 1 liter only). 8 to 10 studs can be installed per liter of epoxy.

Aluminium octagonal shape K Lite KT-304 road stud with Red White reflector 127mm x 90mm x 23mm market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. 
For further enquiry, please contact us at T: +6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  E: flexijoint.ims@gmail.com

Tuesday, 27 August 2019

Flexijoint 3 Channels Cable Ramp Protector

3 Channels Cable Ramp Protector(Front)
3 Channels Cable Ramp Protector(Front -Open)











Rubber Cable Ramp / Hump Protector available to accommodate 2 / 3 / 5 cable channels.

Display shown above of a 3 Channels Cable Ramp Protector. 
Size: 900mm (L) x 500mm (W) x 75mm (H) for 65mm(W) x 55mm(H) cables fitting.


Advantages:-
Durable, cost effective, heavy duty made to protect cables and prevent hazardous situation associates with human tripping over cables and withstand comfortably 10 tons vehicles running over it.

Rubber Cable Ramp / Hump Protector market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. For further enquiry, please contact us at T: +6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  E: flexijoint.ims@gmail.com


Friday, 16 August 2019

Swellable Hydrophilic Waterstop



DESCRIPTIONS

Swellable hydrophilic waterstop is a flexible waterproofing strip consisting butyl rubber element and swellable clay. When expose to water or water dampness, the waterstop will expand and forms a compression seal in non moving concrete joints.

The seal formation against the face of concrete joint then stops water penetration into the structures through the protected joints.

ADVANTAGES
  • Easy installation;
  • No splicing or jointing on site needed like pvc waterstops;
  • Non toxic;
  • Suitable for rough concrete surfaces;
  • Swelling waterstop properties are not affected in long run wet or dry cycle 

AREAS OF USAGE
  • Foundation Wall Slabs;
  • Septical Tankers;
  • Dampen Wells, Manholes
  • Precast Concrete Walls;
  • Portable Water Tanks

Swellable hydrophilic waterstop market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. For further enquiry, please contact us at T : +6 03 79541136 / M : +6 016 3111313 / F : +6 03 79808259 / E : flexijoint.ims@gmail.com. 


Monday, 24 June 2019

Flexijoint Adjustable Parking Pole









Adjustable Parking Pole is flexible in its use as an upright post to control or direct road traffic out of a reserved parking area for particular event or function to be held. 

The upright pole can be lowered to be allowed as parking lot again when initial parking lots are fully occupied. 

It is easily removable as the pole's locking mechanism is on the base plates.


Features:
Easy to Install, Lasting powder coat paint, Excellent barrier on vehicles and people.

Adjustable Square Parking Pole 820mm(H) x 64mm(L) x 64mm(W) with square base 200mm x 200mm market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. For further enquiry, please contact us at T:  +6 03 79541136  M:  +6 016 3111313  F:  +6 03 79808259  E: flexijoint.ims@gmail.com


Thursday, 14 February 2019

Flexijoint Tyre Chock For Small Vehicle











Rubber Tyre Chock prevents accidents and deaths to occur when precautionary step is taken to place it at the vehicle tyres when vehicle is temporary station in idle mode for goods loading / unloading purposes or simply because of vehicle break-down. 

Rubber Tyre Chock offers additional safety precautions particularly when use on heavy vehicles such as trucks, trailers, lorries, buses, forced to park at ascending or descending roads and hand brakes are in faulty conditions.

Rubber Tyre Chock is portable with handle. Size : 200mm (L) x 150mm (H) x 100mm (W).

Rubber Tyre Chock market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia.
For further enquiry, please contact us at T:  +6 03 79541136  M:  +6 016 3111313  F:  +6 03 79808259  E: flexijoint.ims@gmail.com

Wednesday, 13 February 2019

FRP Bollard With Square Base























Fibre Reinforced Plastic Bollard extends its applications beyond just protecting various assets from impact and destruction to uses as road dividers, boundary markers, decorative fencing, barriers for road crossing and even at traffic lights pedestrian cross over area. 

The great popularity of this bollard lies on its corrosion free characteristic managing to save high costs of maintenance work in the long run.

Features:
Easy to install, Corrosion and maintenance free, Fire retardant, High impact resistance but lightweight approximate 3 Kgs, High durability and long term cost effectiveness savings.

Fibre Reinforced Plastic Bollard 955mm (H) with 190mm diameter (top) and 260mm square (square base) market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia.
 For further enquiry, please contact us at T:  +6 03 79541136  M:  +6 016 3111313  F:  +6 03 79808259  E: flexijoint.ims@gmail.com.