Flexijoint 5 Channels Cable Ramp Protector ( Non Separate Connector Type )

5 Channels Cable Ramp ( Non Separate Connector )

5  Channels Cable Ramp ( Non Separate Connector )

Rubber Cable Ramp / Hump Protector accommodates either 2 / 3 / 5 cable channels.

Display shown 5 Channels Rubber Cable Ramp Protector ( Non Separate Connector Type ).
Size: 900mm (L) x 500mm (W) x 55mm (H) for 42mm(W) x 35mm(H) cables fitting.

Advantages:-
Durable, cost effective, heavy duty made to protect cables and prevent hazardous situation associates with human tripping over cables and withstand easily 5 tons vehicles running over it.

Rubber Cable Ramp / Hump Protector market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. For further enquiry, please contact us at T:+6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  E: flexijoint.ims@gmail.com 

 

  

Flexijoint Rubber Speed Hump

Rubber Speed Hump Specifications

Front View

Rubber Speed Hump replaces the conventional concrete speed hump. It is easily fixed and dismantled conveniently as and when one wished. Rubber Speed Hump are designed to reduce vehicle speed, built for long lasting and cost efficient.

Display shown is Rubber Speed Hump 340mm (W) x 45mm (H) x 500mm (L) that comes with dual colour black & yellow ~ Front View.

Rubber Speed Hump Advantages:

Optimum Resilience, High Elasticity & Stretch Strength, Corrosion Immunity, Excellent Weather Resistant, High Mechanical & Tensile Strength, Long Life Span, Immune to Acids, Alkaline, Metals, Salts, Chemical, Non Hazardous, High Elongation At Break, Stable Colour.

Rubber Speed Hump market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. For further enquiry, please contact T:  +6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  E: flexijoint.ims@gmail.com

Collapsible PE Traffic Cone By Flexijoint

Collapsible PE Cone (Fully Extended)

Collapsible PE Cone (Collapsed State)

Collapsible PE Traffic Cones are placed  on roads or footpaths temporarily as a mean to redirect traffic safely. They are often used to create separation or merge lanes directing road users to "Stop-Check" operations by traffic police or during automobile accidents.

Collapsible PE Traffic Cones are popular as they are effective in traffic control management and most often collapsible traffic cones are also used to block off an area.

Features:-
~ Approximate weight 2.5 Kgs;
~ Visibility : Day: 200 - 220 meters; Night: 100 - 110 meters;
~ Easy, portable and minimise storage space just by pushing down to flatten it; 
~ Material : Polyethylene (PE);
~ Collapsed Height : 95mm;

 ~ Extended Height : 670mm;
~ Reflective Material Colour : White;

Collapsible PE Traffic Cone 600mm height x 300mm base width market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. For further enquiry, please contact us at T:            +6 03 79541136        M:             +6 016 3111313        F: +6 03 79808259  E: flexijoint.ims@gmail.com 

Flexijoint 5 Channels Cable Ramp Protector ( Separate Connector Type )

5 Channels Cable Ramp ( Separate Connector )

5 Channels Cable Ramp ( Separate Connector )

5 Channels Cable Ramp ( Separate Connectors At The 4 Corners )

Rubber Cable Ramp / Hump Protector available to accommodate 2 / 3 / 5 cable channels.

Display shown above of a 5 Channels Cable Ramp Protector ( Separate Connector Type ) . 
Size: 900mm (L) x 500mm (W) x 50mm (H) for 35mm(W) x 30mm(H) cables fitting.

Advantages:-
Durable, cost effective, heavy duty made to protect cables and prevent hazardous situation associates with human tripping over cables and withstand comfortably 5 tons vehicles running over it.

Rubber Cable Ramp / Hump Protector market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. For further enquiry, please contact us at T: +6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  E: flexijoint.ims@gmail.com 

High Quality Hazard Blinker Lamp From Flexijoint

Front View

Back View

Hazard Blinker Lamp are normally used in conjunction with warning signs such as dangerous curves, speed limit reductions, school zones, signal ahead, low clearance, flooding, icing, or fog. 

Hazard Blinker Lamp minimises risk of accident occurrence at construction sites or any hazardous area as flashers work effectively to warn incoming visitors to the compound. 

Features :-

~ LED design;
~ Fulfilled BS 3143 Standard Energy Savings;
~ Operate by 2 x 6V lantern battery;
~ Operating time up to 2,600 hours with new battery;
~ Built in light sensor switch or resistor detect darkness and activate lamp but in deactivate mode when light levels increase hence conserving battery energy;
~ All weather waterproof;
~ Durable quality plastic material from Korea;
~ Large lens for excellent visibility;
~ Flash / Steady lighting mode;
~ Mounted bracket included.

Display : Hazard Blinker Lamp Amber / Yellow Colour.

Hazard Blinker Lamp market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. For further enquiry, kindly contact us at T: +6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  E: flexijoint.ims@gmail.com.

Quality Aluminium K Lite KT-304 Road Stud From Flexijoint

Aluminium K Lite KT-304 Road Stud

Road studs are commonly known as highway studs or railways studs or highway markers.Road studs are a type of traffic safety product fixed in the middle of lane lines or yellow double-line for, through its retro reflection, reminding drivers to drive their vehicles along with the lanes.

Features :-
~ ASTM D4280, EN1463-1, SIRIM 1719:2003 standard;
~ PMMA lens ensure highest reflectivity;
Reflectivity ( White Colour ):-
Entrance Angle ( βH , βv=0° ) ±15°  ±10°    ±5° 
Observation Angle α                   2°      1°    0.3°
EN1463-1 (mcd/lx)                   2.5     25     220
Sample 1 (mcd/lx)                    3.8     39     345
Sample 2 (mcd/lx)                    5.1     50     442
Sample 3 (mcd/lx)                    4.6     47     416

(White mcd/lux), (Oberservation Angle=0.2 degree):-

Test Point                                 20L     0.2deg    20R
ASTM D4280                          112      279       112
Sample 1                                 178      628       196
Sample 2                                 275      702       249
Sample 3                                 245      612       203

~ Lowest cost;
~ High load capacity;
~ Good adhesive ability;
~ Easy to install;

Epoxy resin installation method is normally adopted generally for installation of road studs. Two component road stud epoxy adhesive is usually used. Part A and Part B should be mixed thoroughly. To avoid wastage do not mix more epoxy than what will be required in the next 25 minutes (i.e. start with 1 liter only). 8 to 10 studs can be installed per liter of epoxy.

Aluminium octagonal shape K Lite KT-304 road stud with Red White reflector 127mm x 90mm x 23mm market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. For further enquiry, please contact us at T: +6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  E: flexijoint.ims@gmail.com